2 TON FOLDABLE ENGINE HOIST WITH LOAD LEVELER 2 TON FOLDABLE ENGINE HOIST WITH LOAD LEVELER
Online
$440.21 for Each
Retail $660.32
Mfr PN: T32002
Stock: 3
2 TON FOLDABLE ENGINE HOIST WITH LOAD LEVELER

This item cannot ship to APO/FPO addresses.
Online
$440.21 for Each
Retail $660.32
Mfr PN: T32002
Stock: 3

Black Bull 2 Ton Heavy Duty Chain Hoist Black Bull 2 Ton Heavy Duty Chain Hoist
Online
$53.72 for Each
Mfr PN: CHOI2
Stock: 18

Lift small engines, transmissions, large shop tools, or building supplies, up to 8 feet. Perfect for use in the garage, shop or farm. The Black Bull 1 Ton Heavy Duty Chain Hoist is a safe and easy way to move and lift equipment, tools and supplies weighing up to 2,000 pounds.

Securely hook the chain hoist to the ceiling or overhead beam to lift anything in the garage or shop. The 1/4 inch hardened steel chain is equipped with a mechanical load break so this chain hoist is durable and safe to operate. Great for tractor and engine repair or shop use.

  • 8 ft. Standard lift capacity, lifts up to 2 tons (4,000 lbs)
  • Use in the shop or as an engine hoist
  • Heavy duty construction, 1/4+ hardened steel chain, mechanical load break
  • Durable and easy to operate
  • Weighs 22 lbs.
Online
$53.72 for Each
Mfr PN: CHOI2
Stock: 18

8050-10 MAASDAM WIRE GRIP 8050-10 MAASDAM WIRE GRIP
Online
$17.13 for 1 EA
Retail $23.99
Mfr PN: 8050-10
Stock: 14
WIRE GRIP Handles smooth or barbed wire up to 5/32" Cam action insures tighter lock 1000 lb. capacity Bulk 8050-10 MAASDAM WIRE GRIP
Online
$17.13 for 1 EA
Retail $23.99
Mfr PN: 8050-10
Stock: 14

8049 POW FT. R PULL SNAP BLOCK 8049 POW FT. R PULL SNAP BLOCK
Online
$17.25 for 1 EA
Retail $21.99
Mfr PN: 8049
Stock: 7
POWER PULL SNAP BLOCK WITH HOOK Snap block with 5/16" hook Exclusively for Pow'R-Pulls 8049 POW FT. R PULL SNAP BLOCK
Online
$17.25 for 1 EA
Retail $21.99
Mfr PN: 8049
Stock: 7

SOFT SHACKLE SOFT SHACKLE
Online
$52.16 for EA
Retail $57.38
Mfr PN: 176745
Stock: 101
Gator-Jaw shackles are made from Plasma rope which is the highest strength synthetic rope available. Gator-Jaw shackles are stronger than comparable steel shackles. These shackles won't rust and are so light they float. Towing applications include: 4x4 off-road, agriculture & mining equipment and various marine uses. The Gator-Jaw shackle can be washed off with water and air dried. While Gator-Jaw fibers are stronger than steel they are susceptible to wear and cutting. Always inspect shackle before use for excess wear, cutting, or worn and frayed areas.
Online
$52.16 for EA
Retail $57.38
Mfr PN: 176745
Stock: 101

Koch 13403/3281293 Gin Wheel, 3/8 - 1 in, 1000 lb Koch 13403/3281293 Gin Wheel, 3/8 - 1 in, 1000 lb
Online
$63.32 for EA
Retail $68.75
Mfr PN: 13403/3281293
Stock: 40
Used for light duty hoisting operations up to 1000 lb. Latch hook for added safety. Rope size: 3/8'" to 1". Size Lb=15.65 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$63.32 for EA
Retail $68.75
Mfr PN: 13403/3281293
Stock: 40

Power Pull 600 Heat Treated Chain Puller, 3/4 ton, 1/4 in Dia, Steel Power Pull 600 Heat Treated Chain Puller, 3/4 ton, 1/4 in Dia, Steel
Online
$119.00 for EA
Retail $150.79
Mfr PN: 605
Stock: 33
Cap. Tons=3/4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$119.00 for EA
Retail $150.79
Mfr PN: 605
Stock: 33

North American Tool 7519 Gear Driven Chain Hoist, 2 ton North American Tool 7519 Gear Driven Chain Hoist, 2 ton
Online
$67.70 for EA
Retail $85.09
Mfr PN: 7519
Stock: 128
1/4" grade 80 steel chain, forged 360 degree hooks, mechanical load brake for positive load control when lifting or spotting, hardened steel construction, 14" required head room, fully portable for outdoor or indoor use. Lift height: 9'10", This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$67.70 for EA
Retail $85.09
Mfr PN: 7519
Stock: 128

North American Tool 7518 Chain Hoist, 1 ton, Steel North American Tool 7518 Chain Hoist, 1 ton, Steel
Online
$61.17 for EA
Retail $76.85
Mfr PN: 7518
Stock: 51
9'10" lift height, 12.5" required head room, 1/4" grade 80 steel chain, fully portable for use indoors or out, forged 360 degree swivel hooks, mechanical load brake, hardened steel construction. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$61.17 for EA
Retail $76.85
Mfr PN: 7518
Stock: 51

FISHTAPE REEL W/HNDL STL 125FT FISHTAPE REEL W/HNDL STL 125FT
Online
$50.13 for EA
Retail $61.59
Mfr PN: FTS438-125BP
Stock: 46
Fish tape reels steel tape - with handle lgth ft wdth 125 inches x 1/8 Kwik Silver plated fish tape, same strength as conventional steel tape, corrosion resistant, smooth plated to make it easier to fish with. High-impact nylon, one-piece handle with large handle grip. Self-tensioning, wide, impact-resistant rewinder case wi th viewports to ensure tape fit, and retaining strap on inside to hold tape secure. 400 pounds maximum design strength. .060 inches thick - 5 pounds. ...
Online
$50.13 for EA
Retail $61.59
Mfr PN: FTS438-125BP
Stock: 46

500 Lb Gambrel Hoist Kit With Hanging Scale 500 Lb Gambrel Hoist Kit With Hanging Scale
Online
$23.32 for each
Mfr PN: GS500
Stock: 0
The Sportsman Series 500 Lb Gambrel Kit makes butchering easy for medium size game. Use the gambrel to lift game for skinning and processing. The hanging scale includes two industrial-grade steel hooks that can hold up to 550 pounds and has an easy to read dial that displays weight in both pounds and kilograms. A 22 inch steel gambrel spreader bar can hold up to 500 pounds and increases airflow resulting in faster curing times. The gambrel has a powder coat finish that resists rust.

  • For skinning and processing game
  • Makes butchering easy for medium size game
  • 550 lb hanging scale displays weight in both pounds and kilograms
  • 22 inch steel spreader bar increases airflow for faster curing
  • Powder coat finish resists rust
Online
$23.32 for each
Mfr PN: GS500
Stock: 0

Smittybilt HOIST MOTOR FOR 510001 ASSEMBLY 510001-01 Smittybilt HOIST MOTOR FOR 510001 ASSEMBLY 510001-01
Online
$122.70 for EA
Retail $134.97
Mfr PN: 510001-01
Stock: 257
HOIST MOTOR
Online
$122.70 for EA
Retail $134.97
Mfr PN: 510001-01
Stock: 257

Poison Spyder Customs BFH II Rear Crossmember with 2 Inch Receiver 17-17-030 Poison Spyder Customs BFH II Rear Crossmember with 2 Inch Receiver 17-17-030
Online
$359.98 for EA
Retail $395.98
Mfr PN: 17-17-030
Stock: 86
By itself or used in conjunction with the JK BFH™ II Rear Bumper, this ""Built For the Hammers"" crossmember strengthens the Jeep JK Wranglers rear frame when trimmed for maximum ground clearance and departure angle. The BFH™ II Rear Crossmember is CNC laser-cut from high strength 3/16"" plate steel, then precision brake-formed for an exact fit. Dimpled lightneing holes remove unnecessary weight while creating a custom look for those who choose to run the crossmember by itself without a rear bumper to cover it. The minimalist design of the JK BFH™ II Rear Bumper provides the most ground/obstacle clearance and best departure angle possible while preserving the integrity of the Jeep JKs frame strength. Installation requires trimming the bulky rear frame rails and stock bumper mounts and welding in the new crossmember. A laser-cut steel template is provided to assist with making the right cuts. The BFH II Rear Crossmember may be used by itself as an ultra-minimalist, high clearance rear bumper. But it is designed to be used with the Poison Spyder BFH II Rear Bumper. The bumper fits over the crossmember like a glove. Together, this combination provides the frame-strengthening characteristics of the crossmember along with the aesthetics of the BFH II Rear Bumper. This specific part number for the crossmember does not include an integrated hitch receiver, so it can only be used with the K BFH II Rear Bumper - Tabs or K BFH II Rear Bumper - Tabs - Lights. A different version of the BFH II Crossmember is available with a hitch receiver (p/n 17-17-030). NOTES: Installation requires cutting of stock frame rails and welding! Please read through the Installation Instructions so that you are fully aware of the modifications required to your Jeeps frame rails, before purchasing. This product ships as bare steel—it will need to be painted after installation. Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited;2 and 4-door models;Heavy-duty replacement for stock crossmember;Works with BFH II Rear Bumpers;May by used by itself for minimalist bumper CNC laser cut brake-formed 3/16"" steel plate;Integrated hitch receiver
Online
$359.98 for EA
Retail $395.98
Mfr PN: 17-17-030
Stock: 86

HOIST A CART HOIST A CART
Online
$591.96 for EA
Retail $651.16
Mfr PN: 014-100
Stock: 62
From the makers of the Hoist-A-Top, the new Hoist-A-Cart from Lange Originals makes it possible for one person to remove, lower, and store their hardtop on the cart, and wheel their top, doors, and Freedom Top pieces anywhere for storage. Rugged construction, a strong steel frame, heavy-duty swivel casters, and a gear winch, lifts, lowers and stores your top. The cart footprint is small enough to fit in the corner of either a garage, a storage shed, or a car port. Options for two- and four-door models provide accessories so you can store the whole package including doors, top, and Freedom Top pieces, in one compact place. Foam and rubber coatings keep your top and doors in pristine condition. The Hoist-a-Cart makes going topless easier than ever. No drilling required, easy assembly using common hand tools.
Online
$591.96 for EA
Retail $651.16
Mfr PN: 014-100
Stock: 62

Poison Spyder Customs RockBrawler II Rear Bumper with Integrated Single-Action Tire Carrier 17-62-020P1 Poison Spyder Customs RockBrawler II Rear Bumper with Integrated Single-Action Tire Carrier 17-62-020P1
Online
$1868.88 for EA
Retail $2055.77
Mfr PN: 17-62-020P1
Stock: 52
The RockBrawler II is the latest evolution in JK rear bumpers, incorporating many features requested by customers, and product improvements born of real world use and testing of the original RockBrawler. This bumper combines the best features to maximize performance on the toughest trails with some of the more refined traits not normally needed on a dedicated rock crawler. Its most prominent feature is the all new RockBrawler II Tire Carrier, which connects to the tailgate for easy, single-action opening. Its also slightly wider and deeper than the original RockBrawler for increased corner protection, and features an integrated hitch. The RockBrawler II Spare Tire Carriers Single-Action-Opening feature is a huge convenience for when youre trying to open the tailgate and tire carrier with one hand, when youve got an armload of gear or groceries in the other. Rather than latching to itself, the RockBrawler II tire carrier is tethered to the tailgate so that they open and close in tandem. A custom designed tie-rod assembly, bumper mechanism and Tramp Stamp keep the two pieces perfectly aligned when open, but tight and rattle-free when closed. Very few JK rear bumpers come with provisions for mounting backup lamps. Of those that do, fewer still allow the use of high intensity, low power drawing LED lamps. The RockBrawler Rear Bumpers recessed light buckets accept 2-1/2" Round, Clear LED Lamps—the same backup lamps weve sold with our Crusher Corners. The recessed buckets protect them from the rocks and direct light rearward rather than into the bumper interior, the way some competitors bracket-mounted lamps do. Customers may choose to wire them into the reverse light circuit, or wire them to a separate dash switch as a loading or utility light. IMPORTANT: Note that the LED Lamps do NOT come with this bumper, they must be purchased separately part number PSC41-04-300. BLACK POWDER COAT Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited;2 and 4-door models;Black powder coat;3/16" plate steel;Provisions for mounting recessed backup lamps;Integrated 2" receiver;Built-in step/recess to provide access to rear cargo
Online
$1868.88 for EA
Retail $2055.77
Mfr PN: 17-62-020P1
Stock: 52

Poison Spyder Customs BFH II Rear Bumper with 2 Inch Receiver and D-Ring Tabs 17-17-040-D Poison Spyder Customs BFH II Rear Bumper with 2 Inch Receiver and D-Ring Tabs 17-17-040-D
Online
$539.98 for EA
Retail $593.98
Mfr PN: 17-17-040-D
Stock: 35
Poison Spyder BFH™ II Rear Bumpers are designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance and departure angle possible. It is no wider than the Jeep JK Wranglers rear body tub, with angled facets to improve its ability to slide over the rocks while still protecting the corner of the tub from drop-offs and ledges. This version of the BFH II features CNC machined high clearance recovery shackle tabs. For the ultimate in strength and durability, pair it with the JK BFH™ II Rear Crossmember. The BFH™ II Rear Bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit. In keeping with its minimalist design parameter, the BFH™ II Rear Bumper has no provisions for a spare tire carrier. This bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep. It may also be compatible with the OE tailgate-mounted spare tire carrier, depending on the size of the spare tire used. The faceted plate steel design of the JK BFH™ II Rear Bumper provides the most ground/obstacle clearance and best departure angle of any JK rear bumper on the market. To achieve this, installation requires trimming the bulky rear frame rails and stock bumper mounts. A laser-cut steel template is provided to assist with making the right cuts. These modifications include cutting into the stock rear crossmember. At the installers discretion, the stock rear crossmember may be plated across the open cut (materials to do this are not included), or the crossmember removed completely. If the stock crossmember is removed completely, itmay be replaced with the JK BFH™ II Rear Crossmember (note that there are versions of the BFH™ II Crossmember with or without a receiver hitch—this particular version of the BFH™ II Rear Bumper is specificaly designed to work with the non-receiver version—it will not work with the crossmember that has the integrated hitch receiver (p/n 17-17-030). The JK BFH™ II Rear Bumper includes heavy duty, high clearance Recovery Shackle Tabs. These tabs were CAD designed specifically for use with this bumper, with a high-clearance design to minimize loss of departure angle and to anable sliding off of rocks rather than hanging up on them. The tabs are CNC machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles (sold separately). NOTES: Installation requires cutting of stock frame rails! Please read through the Installation Instructions so that you are fully aware of the modifications required to your Jeeps frame rails, before purchasing. This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item. Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited;2 and 4-door models;Low profile "faceted" design for high clearance of trail obstacles;CNC laser cut from 3/16" plate steel, precision brake-formed for a perfect fit;High clearance recovery shackle tabs CNC machined from 1" thick plate steel;Slot for hitch receiver (requires part number 17-17-030);Installation requires cutting/trimming of Jeeps frame rails & rear crossmember
Online
$539.98 for EA
Retail $593.98
Mfr PN: 17-17-040-D
Stock: 35

Power Pull 600 Heat Treated Chain Puller, 1-1/2 ton, 5/16 in Cable Dia, Steel Power Pull 600 Heat Treated Chain Puller, 1-1/2 ton, 5/16 in Cable Dia, Steel
Online
$161.64 for EA
Retail $204.85
Mfr PN: 615
Stock: 33
Cap. Tons=1-1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$161.64 for EA
Retail $204.85
Mfr PN: 615
Stock: 33

HOIST A TOP SIMPLE HOIST A TOP SIMPLE
Online
$171.20 for EA
Retail $188.32
Mfr PN: 014-SIM
Stock: 27
HOIST A TOP SIMPLE
Online
$171.20 for EA
Retail $188.32
Mfr PN: 014-SIM
Stock: 27

Power Pull 400 Chain Block, 1 ton, 1/4 in Dia, Steel Power Pull 400 Chain Block, 1 ton, 1/4 in Dia, Steel
Online
$111.04 for EA
Retail $141.85
Mfr PN: 410
Stock: 26
Cap. Tons=1 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$111.04 for EA
Retail $141.85
Mfr PN: 410
Stock: 26

Power Pull 400 Chain Block, 1/2 ton, 1/4 in Dia, Steel Power Pull 400 Chain Block, 1/2 ton, 1/4 in Dia, Steel
Online
$102.09 for EA
Retail $130.45
Mfr PN: 405
Stock: 26
Pull triple geared chain block hoist is ideal for automotive, industrial and individual farm and marine use. Thick heat-treated steel construction prevents damage from extra rough handling. Interchangeable parts keep maintenance costs at a minimum. Cap. Tons=1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$102.09 for EA
Retail $130.45
Mfr PN: 405
Stock: 26

Poison Spyder Customs BFH II Rear Bumper with 2 Inch Receiver, Light Mounts and D-Ring Tabs 17-17-040-DL Poison Spyder Customs BFH II Rear Bumper with 2 Inch Receiver, Light Mounts and D-Ring Tabs 17-17-040-DL
Online
$563.98 for EA
Retail $620.38
Mfr PN: 17-17-040-DL
Stock: 22
Poison Spyder BFH™ II Rear Bumpers are designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance and departure angle possible. It is no wider than the Jeep JK Wranglers rear body tub, with angled facets to improve its ability to slide over the rocks while still protecting the corner of the tub from drop-offs and ledges. This version of the BFH II features CNC machined high clearance recovery shackle tabs. For the ultimate in strength and durability, pair it with the JK BFH™ II Rear Crossmember. The BFH™ II Rear Bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit. In keeping with its minimalist design parameter, the BFH™ II Rear Bumper has no provisions for a spare tire carrier. This bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep. It may also be compatible with the OE tailgate-mounted spare tire carrier, depending on the size of the spare tire used. The faceted plate steel design of the JK BFH™ II Rear Bumper provides the most ground/obstacle clearance and best departure angle of any JK rear bumper on the market. To achieve this, installation requires trimming the bulky rear frame rails and stock bumper mounts. A laser-cut steel template is provided to assist with making the right cuts. These modifications include cutting into the stock rear crossmember. At the installers discretion, the stock rear crossmember may be plated across the open cut (materials to do this are not included), or the crossmember removed completely. If the stock crossmember is removed completely, itmay be replaced with the JK BFH™ II Rear Crossmember (note that there are versions of the BFH™ II Crossmember with or without a receiver hitch—this particular version of the BFH™ II Rear Bumper is specificaly designed to work with the non-receiver version—it will not work with the crossmember that has the integrated hitch receiver (p/n 17-17-030). The JK BFH™ II Rear Bumper includes heavy duty, high clearance Recovery Shackle Tabs. These tabs were CAD designed specifically for use with this bumper, with a high-clearance design to minimize loss of departure angle and to anable sliding off of rocks rather than hanging up on them. The tabs are CNC machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles (sold separately). NOTES: Installation requires cutting of stock frame rails! Please read through the Installation Instructions so that you are fully aware of the modifications required to your Jeeps frame rails, before purchasing. This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item. Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited;2 and 4-door models;Low profile "faceted" design for high clearance of trail obstacles;CNC laser cut from 3/16" plate steel, precision brake-formed for a perfect fit;High clearance recovery shackle tabs CNC machined from 1" thick plate steel;Mounts for dual recessed 6" LED light bars;Slot for hitch receiver (requires part number 17-17-030)
Online
$563.98 for EA
Retail $620.38
Mfr PN: 17-17-040-DL
Stock: 22

Poison Spyder Customs BFH II Rear Bumper with D-Ring Tabs and Light Mount 17-17-021-DL Poison Spyder Customs BFH II Rear Bumper with D-Ring Tabs and Light Mount 17-17-021-DL
Online
$563.98 for EA
Retail $620.38
Mfr PN: 17-17-021-DL
Stock: 20
Poison Spyder BFH™ II Rear Bumpers are designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance and departure angle possible. It is no wider than the Jeep JK Wranglers rear body tub, with angled facets to improve its ability to slide over the rocks while still protecting the corner of the tub from drop-offs and ledges. This version of the BFH II features CNC machined high clearance recovery shackle tabs. For the ultimate in strength and durability, pair it with the JK BFH™ II Rear Crossmember. The BFH™ II Rear Bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit. In keeping with its minimalist design parameter, the BFH™ II Rear Bumper has no provisions for a spare tire carrier. This bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep. It may also be compatible with the OE tailgate-mounted spare tire carrier, depending on the size of the spare tire used. The faceted plate steel design of the JK BFH™ II Rear Bumper provides the most ground/obstacle clearance and best departure angle of any JK rear bumper on the market. To achieve this, installation requires trimming the bulky rear frame rails and stock bumper mounts. A laser-cut steel template is provided to assist with making the right cuts. These modifications include cutting into the stock rear crossmember. At the installers discretion, the stock rear crossmember may be plated across the open cut (materials to do this are not included), or the crossmember removed completely. If the stock crossmember is removed completely, itmay be replaced with the JK BFH™ II Rear Crossmember (note that there are versions of the BFH™ II Crossmember with or without a receiver hitch—this particular version of the BFH™ II Rear Bumper is specificaly designed to work with the non-receiver version—it will not work with the crossmember that has the integrated hitch receiver (p/n 17-17-030). The JK BFH™ II Rear Bumper includes heavy duty, high clearance Recovery Shackle Tabs. These tabs were CAD designed specifically for use with this bumper, with a high-clearance design to minimize loss of departure angle and to anable sliding off of rocks rather than hanging up on them. The tabs are CNC machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles (sold separately). NOTES: Installation requires cutting of stock frame rails! Please read through the Installation Instructions so that you are fully aware of the modifications required to your Jeeps frame rails, before purchasing. This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item. Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited;2 and 4-door models;Low profile "faceted" design for high clearance of trail obstacles;CNC laser cut from 3/16" plate steel, precision brake-formed for a perfect fit;High clearance recovery shackle tabs CNC machined from 1" thick plate steel;Mounts for dual recessed 6" LED light bars;Installation requires cutting/trimming of Jeeps frame rails & rear crossmember
Online
$563.98 for EA
Retail $620.38
Mfr PN: 17-17-021-DL
Stock: 20

POWER HOIST-A-TOP FOR 4 POWER HOIST-A-TOP FOR 4
Online
$575.98 for EA
Retail $633.58
Mfr PN: 014-910
Stock: 20
POWER HOIST-A-TOP FOR 4
Online
$575.98 for EA
Retail $633.58
Mfr PN: 014-910
Stock: 20

Power Pull 400 Chain Block, 2 ton, 5/16 in Cable Dia, Steel Power Pull 400 Chain Block, 2 ton, 5/16 in Cable Dia, Steel
Online
$167.30 for EA
Retail $211.99
Mfr PN: 420
Stock: 19
Cap. Tons=2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$167.30 for EA
Retail $211.99
Mfr PN: 420
Stock: 19

Trail Stinger in Bare Steel Trail Stinger in Bare Steel
Online
$251.98 for EA
Retail $277.18
Mfr PN: 13-11-010
Stock: 12
Poison Spyder Customs Front Stingers are not the same look-alike rectangular Jeep bumper. The stinger is a sturdy and functional bumper built for today's extreme trails. Stingers assist in minimizing damage during a rollover by helping to protect hood line, radiator, and engine. Additionally preventing potential end-overs when heading down steep terrain. The Stinger also protects the grill and winch with no loss in approach angle typical of bulky square bumpers. Built on a base plate laser cut from 3/16" plate steel, with a Stinger hoop made of CNC-bent 1-3/4" X .120 wall DOM structural tubing. The Trail Stinger's main hoop stands 27" from its base at a 47° angle. Stingers do not include winch mounting provisions. Stingers will work with any manufacture's winch mount plate. OE tow hooks will work in conjunction with Poison Spyder's Trail Stinger; If a stronger recovery point is desired check out Poison Spyder's D-Ring Shackle Tabs. Relocation of any bumper-mounted auxiliary lights is required. Poison Spyder offers a Fairlead Light Mount to relocate auxiliary lights to the top of the roller or hawse winch fairlead. Stingers are shipped bare steel. Fits 1987 to 1995 YJ Wrangler;Bare steel;Made from 3/16" steel plate;1-3/4" x.120 wall DOM tubing;27" from base at a 47 degree angle
Online
$251.98 for EA
Retail $277.18
Mfr PN: 13-11-010
Stock: 12

CANISTER RELOCATION BRCKT CANISTER RELOCATION BRCKT
Online
$23.57 for EA
Retail $23.99
Mfr PN: AC-CRL-100
Stock: 12
CANISTER RELOCATION BRCKT
Online
$23.57 for EA
Retail $23.99
Mfr PN: AC-CRL-100
Stock: 12

Poison Spyder Customs DIY Rear Stinger in Bare Steel 14-13-010 Poison Spyder Customs DIY Rear Stinger in Bare Steel 14-13-010
Online
$780.01 for EA
Retail $858.01
Mfr PN: 14-13-010
Stock: 11
The Poison Spyder Rear Stinger Tire Carrier is the ultimate rear bumper for hard core rock crawling. Like many Poison Spyder original designs, the Rear Stinger concept has been copied by many manufacturers, but none come close to the quality, function, performance and awesome appearance of original. Built for light weight, high clearance, ease of use and a measure of rear-flop protection, the Poison Spyder Rear Stinger is designed for those who spend most of their time in the rocks and need a tire carrier that meets the challenge. The Rear Stinger is basically a fold-down spare tire carrier. By pulling the two upper pins, the tire carrier can swing down, making loading and unloading of huge off-road tires easier. Simply roll the tire up into the carrier, secure it with the provided 3-Way Spare Tire Strap, then swing the carrier back up and pin it in place. The main components are fabricated from NC-bent DOM tubing and CNC laser-cut plate steel. This part number is for the "DIY" Rear Stinger Tire Carrier without the Lower Mount Plate. This would be useful for those who would like to use the Poison Spyder Rear Stinger with their existing bumper, or for adapting it for use on Jeep models and other 4X4's for which we do not yet make a model-specific kit. We provide mounting tabs to attach the Stinger to your bumper or mounting plate of choice. Note that the upper attachment arms are located at the correct width and height for mounting to a TJ without a body lift. Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited;Bare steel;Made from 3/16" steel plate and 1-3/4" x.120 wall DOM tubing;Includes a 3-way spare tire strap;Will hold up to a 40" tire
Online
$780.01 for EA
Retail $858.01
Mfr PN: 14-13-010
Stock: 11

JET CHAIN HOIST, 1 TON, WITH 10 FT. LIFT JET CHAIN HOIST, 1 TON, WITH 10 FT. LIFT
Online
$209.76 for Each
Retail $314.64
Mfr PN: 101910
Stock: 11
| Weston Style Dual Pawl Brake System- Double pawl design increases safety | Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging | Hooks slowly stretch to indicate an overload situation increasing jobsite safety | Needle Bearing Design- Promotes long hoist life with low wear reducing downtime | Heat Treated Load Plates- Heat treated, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments | Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability | All Steel Construction- Impact resistant covers that provide durability and protection | Compact Design- Smaller body and lightweight design for low headroom applications and use in confined areas | Hand Chain Overhaul (Ft.) to Lift Load 1Ft.: 53 | Overload Protection: No | Hand Chain Pull Force (LBF) to Move Load: 60 | Headroom (In.): 12 | Lift (Ft.): 10 | Number of Falls: 1 | Load Capacity (Tons): 1 | Load Chain Dimensions (Mm.): 6 x 18 | Weight (Lbs.): 35
Online
$209.76 for Each
Retail $314.64
Mfr PN: 101910
Stock: 11

Poison Spyder Customs 2007 to 2016 Wrangler 2 and 4 Door JK Full Width Rear W/Tire Carrier & Tabs 17-62-050-D Poison Spyder Customs 2007 to 2016 Wrangler 2 and 4 Door JK Full Width Rear W/Tire Carrier & Tabs 17-62-050-D
Online
$1648.88 for EA
Retail $1813.77
Mfr PN: 17-62-050-D
Stock: 11
The Brawler™ FULL Width Rear Bumper for JK provides the highest ground and tire clearance possible in a full width JK rear bumper. This bumper brings Poison Spyder form and function to the overlander market, and to those who would like to keep their stock JK fender flares. The bumper extends to the full width of the stock flares, to integrate with them cleanly while protecting them from trail hazards. This configuration includes the Single-Action spare tire carrier, high clearance recovery shackle tabs and a receiver hitch. Like all bumpers in the Brawler product line, the FULL Width rear bumper is fabricated from 3/16" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not yet offer a powder coat option for this item. & TABS Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited;2 and 4-door models;Bare Steel;Full-width, multi-faceted design protects lower grille and extends to outer edge of stock flares;CNC laser cut from 3/16" plate steel, precision brake-formed for a perfect fit;"Single action" spare tire carrier opens with tailgate; heavy duty spindle/hinge, latch and 3-way adjustable tire mount;High clearance recovery shackle tabs CNC machined from 1" steel;Integrated high clearance hitch receiver
Online
$1648.88 for EA
Retail $1813.77
Mfr PN: 17-62-050-D
Stock: 11

Poison Spyder Customs 2007 to 2016 Wrangler 2 and 4 Door JK Full Width Rear W/Tire Carrier, Lights, and Tabs 17-62-050-DL Poison Spyder Customs 2007 to 2016 Wrangler 2 and 4 Door JK Full Width Rear W/Tire Carrier, Lights, and Tabs 17-62-050-DL
Online
$1692.88 for EA
Retail $1862.17
Mfr PN: 17-62-050-DL
Stock: 10
The Brawler™ FULL Width Rear Bumper for JK provides the highest ground and tire clearance possible in a full width JK rear bumper. This bumper brings Poison Spyder form and function to the overlander market, and to those who would like to keep their stock JK fender flares. The bumper extends to the full width of the stock flares, to integrate with them cleanly while protecting them from trail hazards. This configuration includes the Single-Action spare tire carrier, recessed mounts for LED reverse lights high clearance recovery shackle tabs and a receiver hitch. Like all bumpers in the Brawler product line, the FULL Width rear bumper is fabricated from 3/16" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not yet offer a powder coat option for this item. Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited;2 and 4-door models;Bare Steel;Full-width, multi-faceted design protects lower grille and extends to outer edge of stock flares;CNC laser cut from 3/16" plate steel, precision brake-formed for a perfect fit;"Single action" spare tire carrier opens with tailgate; heavy duty spindle/hinge, latch and 3-way adjustable tire mount;High clearance recovery shackle tabs CNC machined from 1" steel;Recessed mounts for LED pod lights
Online
$1692.88 for EA
Retail $1862.17
Mfr PN: 17-62-050-DL
Stock: 10

Ceiling Hoist 101 Ceiling Hoist 101
Online
$41.88 for EA
Retail $43.99
Mfr PN: RS2200W
Stock: 10

Easily able to hold a bicycle, kayak, ladder, etc., the El Greco ceiling hoist has been engineered for long and durable performance. Featuring a proven pulley system that allows you to lift and lower heavier objects, this ceiling hoist allows you to store them out of the way and never worry about them until needed.

Feature:

  • Includes mounting hardware and full instructions
  • Clever auto-locking mechanism prevents accidental release
  • Maximum load 50lbs (23Kgs)
  • Maximum Ceiling Height 14 ft.
  • Limited Lifetime Warranty
Online
$41.88 for EA
Retail $43.99
Mfr PN: RS2200W
Stock: 10

Poison Spyder Customs Rear Stinger Tire Carrier with Base Plate and Tabs 14-13-023 Poison Spyder Customs Rear Stinger Tire Carrier with Base Plate and Tabs 14-13-023
Online
$924.02 for EA
Retail $1016.42
Mfr PN: 14-13-023
Stock: 6
The Poison Spyder Rear Stinger Tire Carrier is the ultimate rear bumper for hard core rock crawling. Like many Poison Spyder original designs, the Rear Stinger concept has been copied by many manufacturers, but none come close to the quality, function, performance and awesome appearance of the original. Built for light weight, high clearance, ease of use and a measure of rear-flop protection, the Poison Spyder Rear Stinger is designed for those who spend most of their time in the rocks and need a tire carrier that meets the challenge. 2 LIFT Bare steel;For Jeeps with 2" body lift;Made from 3/16" steel plate and 1-3/4" x.120 wall DOM tubing;3-way spare tire strap;Includes base plate and tabs;Will hold up to a 40" tire
Online
$924.02 for EA
Retail $1016.42
Mfr PN: 14-13-023
Stock: 6